Each time of light exposes photo emulsion at a different rate, depending on how much UV light is present. So if you’re working during the day, curtains are a must. UV light is present in most household lights to some extent and, of course, it is also in sunlight. To be precise about this, screen printing photo emulsion is sensitive to Ultraviolet (UV) light, a part of the light spectrum that is not visible to humans. Most household light bulbs will cure the emulsion, so for a long time that’s how I did it I worked in the dark. Photo emulsion is sensitive to light, meaning that you need to keep your coated screen in a dark room until after your expose it. Seeing in the dark: It’s difficult to properly coat a screen when you’re working in the dark. There are a couple challenging parts to this: photo emulsion is light-sensitive and applying a thin coat is tricky.
The goal here is to coat both sides of the screen with a thin, even layer of emulsion. It takes time to dry so often I actually do this step much earlier, sometimes even before I begin making the digital design. Step 3: Coat your screen in photo emulsionĬoating the screen with photo emulsion is next. Keep scrolling to see a step-by-step photos and notes from this experiment. There are pros and cons to this technique, which you can read at the end of this piece. As you’ll see below, using the mineral oil technique resulted in a good screen, with plenty of fine detail. I was concerned that the fine detail might get lost because there may not be as much contrast between the translucent paper and the ink. You then expose the screen the same way in both techniques and you wash it out the same way The only difference is how you’re blocking the light and transferring the image to the screen.Īnd it works: When I first heard about the mineral oil method, I was skeptical about whether or not this would work as well as transparencies. Similar to a transparency, light can pass through the translucent parts of the oil-soaked paper but the ink on the page blocks light and therefore the emulsion behind it does not cure. The idea here is that when you apply the oil, the white paper turns a milky color, while the ink on the page stays a stark black.
#Screen printing emulsion sheets plus
I used off-brand baby oil as my source for mineral oil because baby oil is just mineral oil plus some fragrance.
This is still photo emulsion: The mineral oil technique is still a photo emulsion method, but instead of using a transparency I printed the design onto regular, white office paper and then coated the paper in mineral oil to make it translucent.